XLi2500 Rugged Power Amplifier 2x750W @ 4ohm 2U

The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi-3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Product Specifications

General

• 4-ohm Dual (per ch.): 750W
• 8-ohm Dual (per ch.): 500W
• 8-ohm Bridge-Mono: 1500W
• Channels: 2
• Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V
• Signal to noise ratio (below rated power 20Hz to 20kHz, A-Weighted): >100dB
• Total Harmonic Distortion (THD) (20Hz-20kHz): <0.5%
• Inter Modulation Distortion (60Hz and 7kHz at 4:1 form full rated output to -40dB): =/<0.35%
• Frequency response (at 1W, 20Hz-20kHz): 0dB, -1dB
• Crosstalk (below rated power) (at 1kHz): -75dB, (at 20kHz): -59dB
• Damping factor (from 10Hz to 400Hz at 8 ohms): >200
• AC line voltage and frequency configurations (± 10%): (120VAC) 60Hz, (220VAC) 50/60Hz, (230-240VAC) 50/60Hz

Physical & Dimensions

• Height: 3.5"
• Width: 19"
• Depth: 12.4"
• Weight: 13.5kg